[Equest-users] Humidification Savings for LEED, BREEM

[Sharad Kumar via Equest-users]

Hi Bikesh,

As per me if the arts storage requires humidification then it is climate
dependent to have achieve the target of having energy savings.

It would depend upon the system and design set-points to show how savings
can be achieved.

For this one requires to have the set-point slightly below the required
cooling set-point. After the water small droplets are atomized it is
certain to achieve small amount of energy saving depending upon the climate
and the maximum and minimum humidity required to be maintained.
My theory is as per some hypothetical climate zone which is warm and humid
or dry.

The concept behind the energy savings can be the latent heat of heating of
water droplets.
.
The water droplets will absorb the heat of the air and make it cooler and
also the storage system might require high level of humidity.

As per me for the exceptional calculation you will have to have the
parametric runs with the maximum and minimum humidity to show the exception
based calculation on the basis of how the humidity factor is causing the
energy savings to be achieved.

Following can be the problems with the target:

1.The climate having low temperature all over the year so the purpose is
not achieved.

2. The climatic condition is highly humid so the de-humidification and
humidification will cause exceptional losses.

3. To achieve the energy savings you can be required to moderate the
maximum and minimum amount of relative humidity the parametric runs.

4. If you are going as per LEED or BREEM, the you are required to have the
humidity maximum and minimum as per the guideline.

Hope this may help.
For more support other can have help.


*Thanks,*
*Sharad.Kumar*

---------- Forwarded message ----------
From: Bikesh Dahal via Equest-users <equest-users at lists.onebuilding.org>
To: Chris Jones <Christopher.Jones at rwdi.com>, Arunabha Sau <
runabha at gmail.com>
Cc: "equest-users at onebuilding.org" <equest-users at onebuilding.org>
Date: Fri, 27 Jan 2017 20:07:07 +0000
Subject: [Equest-users] Humidification Savings for LEED, BREEM

Has anyone shown savings for atomizing humidifiers for LEED and BREEM
Projects? I am working on an arts storage facility with significant
humidification requirements. I would like to claim savings due to the
atomizing humidifiers.

I am developing an exceptional calculation to demonstrate the savings. I
was wondering if anyone has been able to claim savings for these either in
LEED or BREEM certification?

Thanks a lot.



*Bikesh Dahal, BEMP*

*Associate*



[image: cid:image003.png at 01D06C70.35E5BD50]

129 West 27th Street

New York, NY  10001

tel:  212-529-5969, ext. 318

fax: 212-529-6023

bdahal at emegroup.com

www.emegroup.com

NY ▪ Albany ▪ Philadelphia ▪ Denver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170128/cb28bd30/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 8763 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170128/cb28bd30/attachment-0002.png>