[Equest-users] Basement slightly below grade

[John Aulbach via Equest-users]

Hi Phil:
If you are not as concerned with the 3-D rendering, I would have half the basement above ground, half below. A simple step. Thermodynamically, it should be fine.
John R. Aulbach, PE
On Saturday, January 21, 2017, 8:29:20 AM PST, Philip Boutelle via Equest-users <equest-users at lists.onebuilding.org> wrote:Equest users,I need to model a building that is built partially into a hillside, so that te basement is partially below grade. One wall of the basement is almost completely adjacent to earth, and the hill slopes pretty evenly down towards the opposite side, which is completely exposed. Any tips on how to reflect this in my model?Thank for any help here, -Phil


--

Phil Boutelle, PE, CEM     |   Energy Engineer
philboutelle at gmail.com   |   M (831) 359-5268

 

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170121/c3b995ee/attachment-0005.htm>