[Equest-users] [External] High cooling consumption before lights level are decreased

[Porter, Frederick NOR via Equest-users]

Something like this is most likely related to changes in auto-sized/allocated flows or capacities due to that change in lighting load during the peak cooling demand period. Compare the SV-A and PV-A reports for the two runs.

Fred

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Fakeha Sehar via Equest-users
Sent: Tuesday, January 31, 2017 11:42 AM
To: via Equest-users
Subject: [External] [Equest-users] High cooling consumption before lights level are decreased

Hi,

When I raise my building's cooling set points from 2pm to 5pm,I observe for a summer day that the cooling consumption goes low during this time; which is fine. Now when I reduce the lighting schedule values (in order to reduce the lighting load) from 2pm to 5pm lighting consumption goes low during this time but for some reason the cooling consumption gets higher before around 11am to 2pm, why?

Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170207/8ae4d0cb/attachment-0005.htm>