[Equest-users] What does Space Heat include?

Jing Hong hongjing.shirley at gmail.com
Tue Dec 26 07:08:05 PST 2017


Dear all,

Happy Holiday!

I have a question: What does Space Heat include in eQuest? I set a heating
design temp very low, like 40 F for a ventilation only condition, but still
get 0.01  x10^6 Btu Space Heat in June and Aug for Climate zone 3B. That
does not make any sense. I tried several ways to detect where that space
heat comes from in June, but could not figure out.
Here is the background of my model: It is in climate zone 3B. The baseline
is DX+Furnace (ASHRAE). I have four schedules to control temperature:
Cooling (75F), Heating(72F), Ventilation for cooling season(100F),
ventilation for heating season(40F). I setup 100F and 40F to avoid turning
the cooling and heating mode on for the rooms requesting ventilation only.

Please let me know if I did something wrong for my model. Thank you!

Jing
-- 
PhD Candidate, LEED AP BD+C

School of Architecture and Urban Planning
University of Wisconsin-Milwaukee
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20171226/86912863/attachment-0005.htm>


More information about the Equest-users mailing list