[Equest-users] unmet heating load hours
David Eldridge via Equest-users
equest-users at lists.onebuilding.org
Thu Apr 27 15:27:04 PDT 2017
Four hours doesn't seem unreasonable...you are referring to a requirement to not have more unmet hours in the proposed than the baseline?
My suggestion is to take a look and see when these hours are occurring to try and find a common theme - what's the occupancy then, time of day where the spurious hours could be at start-up or later in the main shift, or during a lightly occupied time?
This might lead you to identify an equipment capacity constraint or else a tweak to the control scheme in use for the zone(s).
David S. Eldridge, Jr., P.E., LEED AP BD+C, BEMP, BEAP, HBDP
From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Tim Burke via Equest-users
Sent: Thursday, April 27, 2017 4:50 PM
To: equest-users at onebuilding.org
Subject: [Equest-users] unmet heating load hours
I have a Costco warehouse equest model with 4 unmet heating load hours in my proposed model with zero in my baseline budget model. I need to be able to tweak my model to get rid of these unmet load hours but minor tweaks don't seem to make a difference. Could there be something wrong with the model that results in having a few unmet load hours that are hard to get rid of?
830 North Riverside Drive #200
Renton, WA. 98057
(425) 970-3753 Phone
(425) 970-3756 Fax
This message contains information that is confidential or privileged. The information is intended for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic transmission in error, please notify the sender and delete this message and any attachments
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Equest-users