[Equest-users] Processing end error eQuest crash

[Harshul Singhal via Equest-users]

Sunny,

How are you doing in Portland, Maine.

In BDL file I found this error:


*ERROR*****If WIN-SPEC-METHOD is GLASS-TYPE-INPUT, then GLASS-TYPE must be
            specified.


When I fixed it & tried to run the simulation, I found this error in SIM file.

[cid:image001.png at 01D2BABF.62C5B650]

I think if you fix it, you will be able to see your results.

Give my regards to Vamshi. Thanks,


Harshul Singhal LEED AP BD+C, CMVP
Building Energy Modeling Analyst
psdconsulting.com<http://psdconsulting.com/>


From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Sunny Du via Equest-users
Sent: Friday, April 21, 2017 4:39 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Processing end error eQuest crash

Hi All,

Every time when I open this model, it says "Processing End" after 99% BDL Load File Progress, and eQuest crashes. It shows no error in the BDL file. Has anyone encountered this before? Is there anyway to find out what's wrong? I attached the inp and pd2 files.

Any insights are greatly appreciated!

Best,

Sunny Du
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170421/779b1ed7/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 9444 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170421/779b1ed7/attachment-0002.png>