[Equest-users] Elevator Loads

[Elizabeth Gillmor via Equest-users]

Kone has a nice calculator which gives you typical motor HP and estimated
kWh/yr for different elevator types (hydraulic vs traction) and capacity.

https://toolbox.kone.com/media/en_US/green/index.html?rdrsrc=/media/en_US/green/index.html&rdrtrg=https://toolbox.kone.com/media/en_US/green/index.html


*Elizabeth Gillmor  PE, BEMP, LC, LEED AP*

*e n e r g e t i c s  **consulting engineers, llc*
energetics-eng.com | 303.619.0091

On Tue, Oct 11, 2016 at 11:19 PM, John Aulbach via Equest-users <
equest-users at lists.onebuilding.org> wrote:

> Darryl:
>
> Don't the DC motors have a kW on their nameplate?
>
> Try the Washington State Energy stuff, which has eQuest elevator profiles.
> Only place i have seen them before.
>
> John R. Aulbach, PE
> eQuest Old Guy..
>
>
> On Tuesday, October 11, 2016 8:44 PM, Darryl Kasun via Equest-users <
> equest-users at lists.onebuilding.org> wrote:
>
>
> Hi everyone,
>
> I would like to model some elevators.  I have the following info on the
> elevators:
>
> - Elevators 1, 2, 3, 4 & 5:  5000 lbs ea; 350 fpm.
> - Elevators 6 & 7:  14,000 lbs ea; 200 fpm.
>
> Does anyone know a rough load (ie. kW) that I can apply to these elevators?
>
> Thanks
> Darryl
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161012/fb660a58/attachment-0005.htm>