[Equest-users] Elevator Loads

[John Aulbach via Equest-users]

Darryl:
Don't the DC motors have a kW on their nameplate?
Try the Washington State Energy stuff, which has eQuest elevator profiles. Only place i have seen them before.
John R. Aulbach, PEeQuest Old Guy.. 

    On Tuesday, October 11, 2016 8:44 PM, Darryl Kasun via Equest-users <equest-users at lists.onebuilding.org> wrote:
 

 Hi everyone,
I would like to model some elevators.  I have the following info on the elevators:
- Elevators 1, 2, 3, 4 & 5:  5000 lbs ea; 350 fpm.  - Elevators 6 & 7:  14,000 lbs ea; 200 fpm.

Does anyone know a rough load (ie. kW) that I can apply to these elevators?
ThanksDarryl
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161012/41ae48a1/attachment-0005.htm>