[Equest-users] eQuest 3.65 build 7173 - Wire frame mode

Jeff Ross-Bain via Equest-users equest-users at lists.onebuilding.org
Tue Nov 1 12:17:44 PDT 2016


Also…
If you minimize the Equest window, then open it back up…the W button works for wire view!
I wonder how many Equest quirks are out there, unknown, and lurking in the shadows….

Jeff Ross-Bain, PE, LEED Fellow
President
404-220-8955
www.rbgb.com<http://www.rbgb.com/>

Build Green. Save Time. Save Money.

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Brian Fountain via Equest-users
Sent: Tuesday, November 1, 2016 2:36 PM
To:
Subject: Re: [Equest-users] eQuest 3.65 build 7173 - Wire frame mode

Do not ask me why but in 7173, if you first turn off the Color Legend then W and S will work in 3D mode.

[cid:image002.jpg at 01D23453.2BF56C80]
On 01/11/2016 2:25 PM, Nicholas Caton via Equest-users wrote:
Ohhh – that’s news to me - cool feature!

Confirming for you, since have both builds at-hand:  These “W” and “S” hotkeys to toggle wireframe in the 3D Geometry view *DO* work in 3.65 build 7163.  They do *NOT* work in 3.65 build 7173.

Both our queries remain active, I suppose…
[cid:image004.jpg at 01D23453.2BF56C80]
[cid:image006.jpg at 01D23453.2BF56C80]
[cid:image008.jpg at 01D23453.2BF56C80]
Nick Caton, P.E., BEMP
  Senior Energy Engineer
  Energy and Sustainability Services
  Schneider Electric

D  913.564.6361
M  785.410.3317
E  nicholas.caton at schneider-electric.com<mailto:nicholas.caton at schneider-electric.com>
F  913.564.6380

15200 Santa Fe Trail Drive
Suite 204
Lenexa, KS 66219
United States

[cid:image001.png at 01D189AB.58634A10]



From: Daric Adair [mailto:Daric.Adair at hei-eng.com]
Sent: Tuesday, November 01, 2016 12:43 PM
To: Nicholas Caton <Nicholas.Caton at schneider-electric.com><mailto:Nicholas.Caton at schneider-electric.com>
Cc: equest-users <equest-users at lists.onebuilding.org><mailto:equest-users at lists.onebuilding.org>
Subject: RE: eQuest 3.65 build 7173 - Wire frame mode

I knew about the rotate going wire fame. Not what I’m after. In 3D mode, if you hit “W” is gives a wireframe view (see attached). “S” goes ‘solid’. Image is from 3.64, but I thought 3.65 7163 still had this, but could be wrong. 3.65 7173 apparently doesn’t?

No worries on the tag-on question Nick. All part of it.

Thanks,
DARIC R. ADAIR PE, C.E.M.
Henderson Engineers, Inc. | Mechanical Engineer, Energy Analyst
dir 913 742 5530  tel 913 742 5000  fax 913 742 5001  tx id #F-001236  email daric.adair at hei-eng.com<mailto:daric.adair at hei-eng.com>  www.hei-eng.com<http://www.hei-eng.com/>
Licensed in KS. 

From: Nicholas Caton [mailto:Nicholas.Caton at schneider-electric.com]
Sent: Tuesday, November 01, 2016 12:30 PM
To: Daric Adair <Daric.Adair at hei-eng.com<mailto:Daric.Adair at hei-eng.com>>
Cc: equest-users <equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>>
Subject: RE: eQuest 3.65 build 7173 - Wire frame mode

Holding ctrl and left-click/dragging (i.e. the way you’d “orbit” the view) is how I’m used to peeking at the wireframe.  Doesn’t seem like this has changed between 7163 and 7173.

If there’s a way to make it always wireframe (when not manipulating the 3D view angle), I’m not sure I remember experiencing that.  Would be interesting to learn!


I have a related query however (sorry for layering onto your thread, Daric!):

·        By default, every project has “Base Wire Frame” setting for the 3DManipulationMethod setting.  I sometimes remember that it’s advantageous for QC review of geometries to instead choose the 2nd option (this renders windows & doors, helping to reveal instances of incorrectly “sandwiched” surfaces in more complicated multi-shell situations.

[cid:image012.jpg at 01D23453.2BF56C80]

·        Observation:  If you select something other than the default, that setting lives in the *.pd2 file:

[cid:image014.jpg at 01D23453.2BF56C80]

·        The question:  Is there a way to make “Full Wire Frame (all components)” the *default* 3D manipulation rendering setting?

o   It would seem to be the case as a selectable option within the eQ_Dev.ini file (located in the eQUEST data directory):

[cid:image016.jpg at 01D23453.2BF56C80]

o   The eQUEST.INI file includes a setting for 3DRenderMethod, but switching that value to 1 (“multiple cells”) has apparent no effect on new projects:

[cid:image018.jpg at 01D23453.2BF56C80]

o   I also tried pasting in the 3DMainipulationMethod from eQ_Dev.ini (and removing the semicolon), to no apparent effect:

[cid:image020.jpg at 01D23453.2BF56C80]

~Nick
[cid:image008.jpg at 01D23453.2BF56C80]
Nick Caton, P.E., BEMP
  Senior Energy Engineer
  Energy and Sustainability Services
  Schneider Electric

D  913.564.6361
M  785.410.3317
E  nicholas.caton at schneider-electric.com<mailto:nicholas.caton at schneider-electric.com>
F  913.564.6380

15200 Santa Fe Trail Drive
Suite 204
Lenexa, KS 66219
United States

[cid:image001.png at 01D189AB.58634A10]



From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Daric Adair via Equest-users
Sent: Monday, October 31, 2016 5:09 PM
To: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: [Equest-users] eQuest 3.65 build 7173 - Wire frame mode

Previously a wire frame version of the model could be see/switching to. Wire Frame vs solid walls. Did this get removed or what’s the trick/hot-key to getting this?


Thanks,
DARIC R. ADAIR  PE, C.E.M.
Mechanical Engineer, Energy Analyst

[HEI                logo]

Henderson Engineers, Inc.   8345 Lenexa Drive, Suite 300   Lenexa, KS 66214
dir 913 742 5530  tel 913 742 5000  fax 913 742 5001  tx id #F-001236  www.hei-eng.com<http://www.hei-eng.com/>

Licensed in KS. 
Sending me large files? Please use my HEI DropBox<https://apps.hei-eng.com/DropBox/upload.aspx?to=daric.adair@hei-eng.com>
[Facebook Logo]<http://www.facebook.com/hendersonengineers>

[Twitter Logo]<http://twitter.com/hei_eng>

[Linkedin Logo]<http://www.linkedin.com/company/henderson-engineers-inc>




________________________________

This email and any files transmitted with it are confidential and are intended solely for the use of the individual or entity to whom they are addressed. This communication represents the originator's personal views and opinions, which do not necessarily reflect those of Henderson Engineers, Inc. If you are not the original recipient or the person responsible for delivering the email to the intended recipient, be advised that you have received this email in error, and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you received this email in error, please immediately notify administrator at hei-eng.com<mailto:administrator at hei-eng.com>.

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
________________________________
This message was scanned by Exchange Online Protection Services.
________________________________

________________________________

This email and any files transmitted with it are confidential and are intended solely for the use of the individual or entity to whom they are addressed. This communication represents the originator's personal views and opinions, which do not necessarily reflect those of Henderson Engineers, Inc. If you are not the original recipient or the person responsible for delivering the email to the intended recipient, be advised that you have received this email in error, and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you received this email in error, please immediately notify administrator at hei-eng.com<mailto:administrator at hei-eng.com>.

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
________________________________
This message was scanned by Exchange Online Protection Services.
________________________________




_______________________________________________

Equest-users mailing list

http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org

To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 33476 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0024.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 39083 bytes
Desc: image004.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0025.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.jpg
Type: image/jpeg
Size: 65603 bytes
Desc: image006.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0026.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image008.jpg
Type: image/jpeg
Size: 2794 bytes
Desc: image008.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0027.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image010.jpg
Type: image/jpeg
Size: 5618 bytes
Desc: image010.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0028.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image012.jpg
Type: image/jpeg
Size: 72829 bytes
Desc: image012.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0029.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image014.jpg
Type: image/jpeg
Size: 53872 bytes
Desc: image014.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0030.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image016.jpg
Type: image/jpeg
Size: 21258 bytes
Desc: image016.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0031.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image018.jpg
Type: image/jpeg
Size: 8304 bytes
Desc: image018.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0032.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image020.jpg
Type: image/jpeg
Size: 27465 bytes
Desc: image020.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0033.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image021.jpg
Type: image/jpeg
Size: 5647 bytes
Desc: image021.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0034.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image023.jpg
Type: image/jpeg
Size: 5761 bytes
Desc: image023.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0035.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image025.png
Type: image/png
Size: 1245 bytes
Desc: image025.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0006.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image027.png
Type: image/png
Size: 1101 bytes
Desc: image027.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0007.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image029.png
Type: image/png
Size: 1356 bytes
Desc: image029.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/94c2e0f6/attachment-0008.png>


More information about the Equest-users mailing list