[Equest-users] eQuest 3.65 build 7173 - Wire frame mode

Brian Fountain via Equest-users equest-users at lists.onebuilding.org
Tue Nov 1 11:35:39 PDT 2016


Do not ask me why but in 7173, if you first turn off the Color Legend 
then W and S will work in 3D mode.



On 01/11/2016 2:25 PM, Nicholas Caton via Equest-users wrote:
>
> Ohhh – that’s news to me - cool feature!
>
> Confirming for you, since have both builds at-hand:  These “W” and “S” 
> hotkeys to toggle wireframe in the 3D Geometry view **DO** work in 
> 3.65 build 7163.  They do **NOT** work in 3.65 build 7173.
>
> Both our queries remain active, I suppose…
>
> *Nick Caton, P.E., BEMP*
>
> Senior Energy Engineer
> Energy and Sustainability Services
> Schneider Electric
>
> 	
>
> D 913.564.6361
> M 785.410.3317
> E nicholas.caton at schneider-electric.com 
> <mailto:nicholas.caton at schneider-electric.com>
> F 913.564.6380
>
> 	
>
> 15200 Santa Fe Trail Drive
> Suite 204
> Lenexa, KS 66219
> United States
>
> cid:image001.png at 01D189AB.58634A10
>
> *From:* Daric Adair [mailto:Daric.Adair at hei-eng.com]
> *Sent:* Tuesday, November 01, 2016 12:43 PM
> *To:* Nicholas Caton <Nicholas.Caton at schneider-electric.com>
> *Cc:* equest-users <equest-users at lists.onebuilding.org>
> *Subject:* RE: eQuest 3.65 build 7173 - Wire frame mode
>
> I knew about the rotate going wire fame. Not what I’m after. In 3D 
> mode, if you hit “W” is gives a wireframe view (see attached). “S” 
> goes ‘solid’. Image is from 3.64, but I thought 3.65 7163 still had 
> this, but could be wrong. 3.65 7173 apparently doesn’t?
>
> No worries on the tag-on question Nick. All part of it.
>
> Thanks,
>
> DARIC R. ADAIR PE, C.E.M.
> *Henderson Engineers, Inc. | *Mechanical Engineer, Energy Analyst
> *dir*913 742 5530  *tel* 913 742 5000  *fax* 913 742 5001  *tx id* 
> #F-001236  *email* daric.adair at hei-eng.com  *www.hei-eng.com* 
> <http://www.hei-eng.com/>
> Licensed in KS. 
>
> *From:* Nicholas Caton [mailto:Nicholas.Caton at schneider-electric.com]
> *Sent:* Tuesday, November 01, 2016 12:30 PM
> *To:* Daric Adair <Daric.Adair at hei-eng.com 
> <mailto:Daric.Adair at hei-eng.com>>
> *Cc:* equest-users <equest-users at lists.onebuilding.org 
> <mailto:equest-users at lists.onebuilding.org>>
> *Subject:* RE: eQuest 3.65 build 7173 - Wire frame mode
>
> Holding ctrl and left-click/dragging (i.e. the way you’d “orbit” the 
> view) is how I’m used to peeking at the wireframe.  Doesn’t seem like 
> this has changed between 7163 and 7173.
>
> If there’s a way to make it always wireframe (when not manipulating 
> the 3D view angle), I’m not sure I remember experiencing that.  Would 
> be interesting to learn!
>
> I have a related query however (sorry for layering onto your thread, 
> Daric!):
>
> ·By default, every project has “Base Wire Frame” setting for the 
> 3DManipulationMethod setting.  I sometimes remember that it’s 
> advantageous for QC review of geometries to instead choose the 2^nd 
> option (this renders windows & doors, helping to reveal instances of 
> incorrectly “sandwiched” surfaces in more complicated multi-shell 
> situations.
>
> ·Observation:  If you select something other than the default, that 
> setting lives in the *.pd2 file:
>
> ·The question:  Is there a way to make “Full Wire Frame (all 
> components)” the **default** 3D manipulation rendering setting?
>
> oIt would seem to be the case as a selectable option within the 
> eQ_Dev.ini file (located in the eQUEST data directory):
>
> oThe eQUEST.INI file includes a setting for 3DRenderMethod, but 
> switching that value to 1 (“multiple cells”) has apparent no effect on 
> new projects:
>
> oI also tried pasting in the 3DMainipulationMethod from eQ_Dev.ini 
> (and removing the semicolon), to no apparent effect:
>
> ~Nick
>
> *Nick Caton, P.E., BEMP*
>
> Senior Energy Engineer
> Energy and Sustainability Services
> Schneider Electric
>
> 	
>
> D 913.564.6361
> M 785.410.3317
> E nicholas.caton at schneider-electric.com 
> <mailto:nicholas.caton at schneider-electric.com>
> F 913.564.6380
>
> 	
>
> 15200 Santa Fe Trail Drive
> Suite 204
> Lenexa, KS 66219
> United States
>
> cid:image001.png at 01D189AB.58634A10
>
> *From:* Equest-users 
> [mailto:equest-users-bounces at lists.onebuilding.org] *On Behalf Of 
> *Daric Adair via Equest-users
> *Sent:* Monday, October 31, 2016 5:09 PM
> *To:* equest-users at lists.onebuilding.org 
> <mailto:equest-users at lists.onebuilding.org>
> *Subject:* [Equest-users] eQuest 3.65 build 7173 - Wire frame mode
>
> Previously a wire frame version of the model could be see/switching 
> to. Wire Frame vs solid walls. Did this get removed or what’s the 
> trick/hot-key to getting this?
>
> Thanks,
>
> DARIC R. ADAIR PE, C.E.M.
> Mechanical Engineer, Energy Analyst
>
> HEI logo
>
> *Henderson Engineers, Inc.*  8345 Lenexa Drive, Suite 300   Lenexa, KS 
> 66214
> *dir*913 742 5530  *tel*913 742 5000  *fax*913 742 5001  *tx 
> id*#F-001236  *www.hei-eng.com* <http://www.hei-eng.com/>
>
> Licensed in KS. 
> Sending me large files? Please use my HEI DropBox 
> <https://apps.hei-eng.com/DropBox/upload.aspx?to=daric.adair@hei-eng.com>
>
> Facebook Logo <http://www.facebook.com/hendersonengineers>
>
> 	
>
> Twitter Logo <http://twitter.com/hei_eng>
>
> 	
>
> Linkedin Logo <http://www.linkedin.com/company/henderson-engineers-inc>
>
> ------------------------------------------------------------------------
>
>
> This email and any files transmitted with it are confidential and are 
> intended solely for the use of the individual or entity to whom they 
> are addressed. This communication represents the originator's personal 
> views and opinions, which do not necessarily reflect those of 
> Henderson Engineers, Inc. If you are not the original recipient or the 
> person responsible for delivering the email to the intended recipient, 
> be advised that you have received this email in error, and that any 
> use, dissemination, forwarding, printing, or copying of this email is 
> strictly prohibited. If you received this email in error, please 
> immediately notify administrator at hei-eng.com 
> <mailto:administrator at hei-eng.com>.
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> ______________________________________________________________________
>
> ------------------------------------------------------------------------
>
> This message was scanned by Exchange Online Protection Services.
>
> ------------------------------------------------------------------------
>
> ------------------------------------------------------------------------
>
>
> This email and any files transmitted with it are confidential and are 
> intended solely for the use of the individual or entity to whom they 
> are addressed. This communication represents the originator's personal 
> views and opinions, which do not necessarily reflect those of 
> Henderson Engineers, Inc. If you are not the original recipient or the 
> person responsible for delivering the email to the intended recipient, 
> be advised that you have received this email in error, and that any 
> use, dissemination, forwarding, printing, or copying of this email is 
> strictly prohibited. If you received this email in error, please 
> immediately notify administrator at hei-eng.com 
> <mailto:administrator at hei-eng.com>.
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> ______________________________________________________________________
>
> ------------------------------------------------------------------------
> This message was scanned by Exchange Online Protection Services.
> ------------------------------------------------------------------------
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: jijbcjbb.png
Type: image/png
Size: 83891 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0020.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 53849 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0021.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 94537 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0022.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 255 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0023.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 7893 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0024.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 58891 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0025.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 49358 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0026.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 11873 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0027.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 4055 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0028.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 13775 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0029.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 5566 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0008.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 192 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0009.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 177 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0010.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 198 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161101/2e58297a/attachment-0011.gif>


More information about the Equest-users mailing list