[Equest-users] Output of Space cool consumption comes in negative

[Javed Iqbal]

Would you mind sharing your INP and PD files?

On Mon, Mar 28, 2016 at 10:13 PM, Nitin Harjai <nitin.harjai28 at gmail.com>
wrote:

> Hi...
>
> I have a problem regarding the equest output & I need your help so that I
> can complete the project on time.
>
> At the first step to remove the proposed case unmet hours,i have increased
> the cfm of same zone by diverting the cfm of other zone which is having
> zero unmet hour, in order to maintain the design CFM of particular system
> throughout the model.
>
> After simulate the model, the unmet hour of same zone has been reduced
> without affecting the zone from where the CFM was diverted, but the output
> of space cool consumption comes in negative. I have attached the pics of
> before & after the simulation of monthly energy consumption graph.
> I just want to know that why is this space cool output consumption showing
> in negative and how to make it correct?
>
> For your information, this is the hospital project consist of  ground+7
> floors+3 basements and for cooling & heating, there are two water cooled
> screw chiller, two hot water generator are used on site.
>
>
> Regards,
> Nitin Harjai
> Sustainability Engg.
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 


Javed Iqbal, LEED AP, CEA
Sr. Energy Analyst
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160328/517a53c2/attachment-0002.htm>