[Equest-users] Spandrel Modeling

[Jones, Christopher via Equest-users]

Spandrel panels are exterior opaque walls, not glazing. SC and VT do not get set for opaque walls. You can building your spandrel using layer-by-layer or by simply specifying an R-value. A typical spandrel panel with 4” of semi-rigid insulation realizes about R-6 depending on the ratio of spandrel to framing.




[cid:image003.png at 01D09C46.E75BA0D0]
Christopher Jones, P.Eng.
Senior Engineer

WSP Canada Inc.
2300 Yonge Street, Suite 2300
Toronto, ON M4P 1E4
T +1 416-644-4226
F +1 416-487-9766
C +1 416-697-0056

www.wspgroup.com<http://www.wspgroup.com/>

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Darryl Kasun via Equest-users
Sent: Monday, June 27, 2016 7:26 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Spandrel Modeling

Hi everybody!

I’m modeling spandrel sections.  I have the conductance calculated and just want to make sure I get the SC, VT and outside emissivity correct.

I have both the shading coefficient and visible transmittance set at 0 – please correct me if wrong.

What should I set the outside emissivity to?

Thanks!
Darryl

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160628/e352f554/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 6574 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160628/e352f554/attachment-0005.png>