[Equest-users] Spandrel Modeling

[Darryl Kasun via Equest-users]

Hi everybody!

I’m modeling spandrel sections.  I have the conductance calculated and just want to make sure I get the SC, VT and outside emissivity correct.

I have both the shading coefficient and visible transmittance set at 0 – please correct me if wrong.

What should I set the outside emissivity to?  

Thanks!
Darryl

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160627/65c571b4/attachment-0005.htm>