[Equest-users] Thermal blocks in eQuest

[Veronica Ochoa]

Hi eQuesters,

I found an old thread that said that multiple zones in eQuest could not be "grouped" under one system (PSZ- Sys4) and be considered one thermal block. Is this regardless of whether the zones are identical/ have the same uses? Where is this in the manuals?

My LEED reviewer has mentioned (several times) that I need to have individual systems for each of the zones below (as I am using Sys4), however I've assumed these zones as a thermal block under Table G3.1 #7 (they are all plant rooms w/o glazing) and I'm still getting the same comments... 90.1's definition of thermal block says they do not need to be contiguous in order to make a thermal block so I did not think there would be a problem in assuming these zones as a thermal block.

Any thoughts on this?

Many thanks in advance,

[cid:image003.jpg at 01D15FF8.C9A72E80]



Hurley Palmer Flatt
Veronica Ochoa  |  Consultant
d +44 20 7535 3750
t +44 20 7535 3100
e veronica.ochoa at hurleypalmerflatt.com
www.hurleypalmerflatt.com
View company email disclaimer at: http://www.hurleypalmerflatt.com/disclaimer.html
Please consider the environment before printing this email.
LinkedInTwitterFacebook
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160205/667a6f19/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 20106 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160205/667a6f19/attachment-0005.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: imagef20fed.png at f97bb72f.png
Type: image/png
Size: 2891 bytes
Desc: imagef20fed.png at f97bb72f.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160205/667a6f19/attachment-0005.png>