[Equest-users] Design Guidance

Chris Jones via Equest-users equest-users at lists.onebuilding.org
Tue Aug 23 05:10:51 PDT 2016


Hello,
You will get assistance from the users in this group. But I suggest that you also read the well documented DOE2.2 manuals located here:
http://doe2.com/download/doe-22/

DOE22Vol1-Basics.pdf
DOE22Vol2-Dictionary_48r.pdf
DOE22Vol3-Topics_48y.pdf.




Christopher Jones, P. Eng.
Rowan Williams Davies & Irwin Inc.
Consulting Engineers & Scientists
901 King Street West, Suite 400, Toronto, Ontario, M5V 3H5
T: (519) 823-1311 ext 2052
M: (416) 697-0056

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Saurabh Kumar Srivastava via Equest-users
Sent: Tuesday, August 23, 2016 4:16 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Design Guidance

Hello everyone!

Greetings!

I wished to learn how to model these in my Equest model of a NC Building.

- The DHW uses heat from the Steam meter(Purchased Heat { using Hot Water}) which I've used for heating the Building. How do I assign and/or connect, such that the DHW would use the same heat used for heating the Building?

-The Building has 4 Water cooled Chillers which have 4 Drycoolers. 1 drycooler is already made by default. I wished to model 3 more, so that they serve the 4 chillers.
  -- Place to input the Cooling Tower Fan power for each of the 4 Drycoolers; Would It be in the Codensor Water Loop Pump?
  -- Place to Input Condensor water(CW) leaving temperature

-Place to input Chilled Water Supply Temperature and CHW Delta T (Temp Diff between supplying of Chilled water and leaving CHW) for the Chiller.

- 4 Primary Chilled water Pumps for Chiller are present. The Places to input the values for Primary CHW Pump power and Primary CHW Flow. In case I've got to make and assign Primary Chilled water Pumps, where can I do that ?

I'm slightly confused between the Chilled Water Loop Pump under the CHW loop; is it the Secondary Pump or Is it a summation of Primary and Secondary pumps ?

-How do I sequence/stage the 4 chillers. I've made a step of 0-200: Chiller 1;  200-400: Chiller 2;  400-600:Chiller 3;  600-880: Chiller 4;  but I've not known the technique to input this data.

[cid:image001.jpg at 01D1FD15.DC74D5C0]

Best Regards

Kumar


________________________________
RWDI - One of Canada's 50 Best Managed Companies - This communication is intended for the sole use of the party to whom it was addressed and may contain information that is privileged and/or confidential. Any other distribution, copying or disclosure is strictly prohibited. If you received this email in error, please notify us immediately by replying to this email and delete the message without retaining any hard or electronic copies of same. Outgoing emails are scanned for viruses, but no warranty is made to their absence in this email or attachments. If you require any information supplied by RWDI in a different format to facilitate accessibility, contact the sender of the email, email solutions at rwdi.com or call +1.519.823.1311.
________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160823/ac022097/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 77980 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160823/ac022097/attachment-0002.jpg>


More information about the Equest-users mailing list