[Equest-users] Compliance Analysis Errors

[Jay B. Dyer via Equest-users]

Has there been any solution presented recently to the "Error encountered setting data to LAYERS component
'901_NRes_EFlr_Layr' imported from library: BDL Symbol not found (DBID=190000020003) evaluating rule: Fetch NRes Floor layers

I have 9 errors , one for each 90.1 construction layer.

This has occurred in 3.64, 3.65, and 3.70 and within multiple models.  I used to set all of the non conditioned spaces to conditions and skip through some compliance analysis errors, but this is different.  I see some similar posts over the years without any concrete solution.

Auto-generaton of most of the 90.1 compliance model is such a time saver when it used to work.

Thanks in advance.

James B. Dyer, P.E., CEM, BEAP, LEED AP
Senior Mechanical Engineer
I.C. Thomasson Associates, Inc.
1132 Country Club Drive
Orlando, FL  32804
407.420.9924 – Office
321.287.1701 – Mobile
<http://www.icthomasson.com>www.icthomasson.com  |  Facebook<https://www.facebook.com/icthomasson><https://www.facebook.com/icthomasson>  |  LinkedIn<https://www.linkedin.com/company/i-c-thomasson-associates-inc->  |  Twitter<https://twitter.com/ICThomasson>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160823/42895d5d/attachment-0001.htm>