[Equest-users] FW: Invalid Command and/or Reference Table Indices

[via Equest-users]

If it isn't obvious after a single pass, it can be fastest to simply
delete the offending shell and carefully re-do that shell's geometries.
Some problems are better left unsolved when you have a tight deadline
;-).

 

~Nick

 

 

Nick Caton, P.E.

  Senior Energy Engineer
  Energy and Sustainability Services
  Schneider Electric

D  913.564.6361 
M  785.410.3317 
E  nicholas.caton at schneider-electric.com
<mailto:nicholas.caton at schneider-electric.com> 
F  913.564.6380

15200 Santa Fe Trail Drive
Suite 204
Lenexa, KS 66219
United States

 

 

 

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org]
On Behalf Of Bruce Easterbrook via Equest-users
Sent: Tuesday, August 09, 2016 8:50 AM
To: Saurabh Kumar Srivastava; equest-users at lists.onebuilding.org; 
jra_sac at yahoo.com
Subject: Re: [Equest-users] Invalid Command and/or Reference Table
Indices

 

You might have a gap or overlap in your space polygons.  This might have
created an interstitial space which eQuest has recognized as a space.
You will need to check your vertices to make sure they are all accurate.
Even .001 will throw things out.
Bruce Easterbrook P.Eng.
Abode Engineering

On 8/9/2016 1:55 AM, Saurabh Kumar Srivastava via Equest-users wrote:

	Hello All,

	 

	I'm modelling a 6 Story commercial Building.
	While Defining the Zone Group Definitions and assigning Acitivty
Area type in the General Wizard-One space is giving an Error of:
"Invalid Command and/or Reference Table Indices"

	 

	It's seen as:
	
	 

	 

	I've been trying to remove it but haven't made any success till
now
	It would be really kind of you to provide a feedback as I have a
deadline to finish the project by this Friday.

	 

	Best Regards

	 

	Kumar

	 

	
	
	

	_______________________________________________
	Equest-users mailing list
	
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
	To unsubscribe from this mailing list send  a blank message to 
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

	
	
	

	No virus found in this message.
	Checked by AVG - www.avg.com
	Version: 2016.0.7690 / Virus Database: 4633/12782 - Release
Date: 08/09/16



______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud
service.
______________________________________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160809/0d16b19e/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 255 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160809/0d16b19e/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 7893 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160809/0d16b19e/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 18940 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160809/0d16b19e/attachment-0001.jpeg>