[Equest-users] SD Bldg Shell -Change in bldg shell order

Sam Siassi s.siassi at internatenergy.com
Wed Jun 24 08:06:58 PDT 2015


Hello Pranita,

In the wizard mode, when you want to place a shell on top of another one,
the order matters. If you created the E1d after you created E2, then the
wizard does not give you the option to put it on top of it as it does not
show it in the dropdown menu. You can checkmark the "specify exact
coordinate" under that dropdown menu and write the coordinates accordingly
(So whatever it is for E1d but change the Z value to be on top of it).

Hope this helps

*Sam Siassi*
*Building Scientist and Analytical Engineering*
*Internat Energy Solutions Canada Inc.*
*Tel: 416-628-4658 ext. 149*
*www.internatenergy.com <http://www.internatenergy.com/>*

On Tue, Jun 23, 2015 at 10:57 AM, Pranita Kothuru Komirishetty <
pranita.kothuru at gmail.com> wrote:

> Hello All -
>
> I am working on a multistory building with 15 floor types (E1 to E15).
> After doing all the 15 shell types we have decided to split the E1 into 5
> different shells (E1, E1a, E1b, E1c, E1d) since the zoning is very
> different on each of these floors.
>
> I was able to create new shells( by copying data from E1) and place them
> above the corresponding floor. I am having issues when it comes to placing
> my E2 above E1d.
>
> In the schematic design wizard screen 1, in Posiiton this shell
> immediately above............... (where we have to pick the shell from the
> drop down list), here I do not see the E1d shell (which I created after all
> the above above shells were created.
>
> I changed the prefix names to E1a  to E1d instead of using the default
> eQuest names.
>
> Currently E2 says its above E1, instead it has to be above E1d. The drop
> down list does not show E1d. I saved and simulated the model assuming it
> might then populate the new shells in the drop down list. This did not work.
>
> Any thoughts on how to fix this.
>
>
> --
>
> *- Pranita *
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150624/01c0d7bd/attachment-0005.htm>


More information about the Equest-users mailing list