[Equest-users] Differen zoning pattern for cooling and heating

Julien Marrec julien.marrec at gmail.com
Sat Jun 6 04:13:39 PDT 2015


Hi Pranita,

In your example, there's absolutely no problem considering that the
baseboards are zonal systems. Whatever the HVAC system you select, you can
always add baseboard under the "preheat/baseboard" section.

So model one system that is your AHU and put the two zones that have
cooling under it. And model another HVAC system for the zones that have
only heating.

Best,


--
Julien Marrec, EBCP, BPI MFBA
Energy&Sustainability Engineer
T: +33 6 95 14 42 13

LinkedIn (en) : www.linkedin.com/in/julienmarrec
LinkedIn (fr) : www.linkedin.com/in/julienmarrec/fr
<http://www.linkedin.com/in/julienmarrec>

2015-06-05 16:39 GMT+02:00 Pranita Kothuru Komirishetty <
pranita.kothuru at gmail.com>:

> Hello -
>
> I am modeling a building with different zones for cooling and heating.
> Example some floor have 4 zones for heating (perimeter served by radiators
> and Core zone), but for cooling they are only 2 zones served by AHUs.
>
> Any comments or thoughts on how to represent this in eQuest. I have my
> schematic wizard file where if needed I can go back and redo zones.
>
> Thank you in advance.
>
> --
>
> *- Pranita *
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150606/8a5d910c/attachment-0005.htm>


More information about the Equest-users mailing list