[Equest-users] Differen zoning pattern for cooling and heating

Fri Jun 5 07:39:35 PDT 2015

Hello -

I am modeling a building with different zones for cooling and heating.
Example some floor have 4 zones for heating (perimeter served by radiators
and Core zone), but for cooling they are only 2 zones served by AHUs.

Any comments or thoughts on how to represent this in eQuest. I have my
schematic wizard file where if needed I can go back and redo zones.

Thank you in advance.

-- 

*- Pranita *
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150605/996f7e14/attachment-0005.htm>