[Equest-users] eQuest v3.65 compliance analysis error

[František Bartoš]

Hello,

I made model of quite simple rectangular office building in eQuest v3.65 
and energy simulation run succcesssfully, but compliance analysis ends 
with error code ""Error Assign zone to baseline floor system: 
CRRule::Eval() error posting symbolic (value 4.37216e-297) result to BDL".

Does anybody know, whats the problem, where to find wrong parts in my 
model? Or can help to perform compliance analysis in other version of 
eQuest?

I found this article about it, but its 3 years old so I think this hould 
be already updated.

http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2010-October/006611.html

Thanks for alll advices.


F.Bartoš


*František Bartoš*
Energetika a certifikace budov
Enerfis s.r.o.

Tel.: +420 222 766 952
Fax: +420 222 766 959
Mob: +420 607 965 265
E-mail: bartos at enerfis.cz <mailto:bartos at enerfis.cz>




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20131118/8f02d772/attachment.htm>