[Equest-users] Steam Traps

[Jeremy Poling]

I thought this had been asked before but was unsuccessful bringing it up in
the archives.

For a steam baseboard system, is there a way to model a loss factor due to
faulty steam traps?  I could see using the SUPPLY-LOSS-DT keyword as a
means to model this, but my input there would be based on a guess at the
system loss due to the steam trap.

This is for a calibrated model, as an FYI.  Thanks!

Jeremy R. Poling, PE, LEED AP+BDC
Sustainability Consultant
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120510/55a20640/attachment.htm>