<div>I thought this had been asked before but was unsuccessful bringing it up in the archives.</div><div> </div><div>For a steam baseboard system, is there a way to model a loss factor due to faulty steam traps?  I could see using the SUPPLY-LOSS-DT keyword as a means to model this, but my input there would be based on a guess at the system loss due to the steam trap.</div>
<div> </div><div>This is for a calibrated model, as an FYI.  Thanks!</div><div> </div><div>Jeremy R. Poling, PE, LEED AP+BDC</div>
<div>Sustainability Consultant</div>
<div> </div>