[Equest-users] Modeling a fluid Cooler

[Tabitha Jason]

Hello All,

I am trying to model an air cooled chiller that has one pump and is
connected to three U machines and one screw machine.  I have the
HP and the pressure drop through these machines but I can't figure out how
to connect them to the system I created.

Basically I am trying to get the savings of having the plant as it is now vs
adding a fluid cooler.  I know in order to add the fluid cooler, I have to
add another chiller to the loop and make it a water economizer (is that
correct?)

Does anyone know how I can get those four machines connected to the loop?
Is there a better way to do this?  I have used eQuest to do some energy
modeling and LEED stuff but I am no good at this detailed edit mode stuff.
I am always afraid I am missing something.

Thanks,
Tab
-- 
*Tabitha Jason*
*ThermaDraft* Consulting
Phone: (603) 365-8834
Fax: (603) 584-9199
Email: ThermaDraft at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110929/e075462a/attachment.htm>