<div>Hello All,</div><div> </div><div>I am trying to model an air cooled chiller that has one pump and is connected to three U machines and one screw machine.  I have the <br clear="all">HP and the pressure drop through these machines but I can't figure out how to connect them to the system I created.</div>
<div> </div><div>Basically I am trying to get the savings of having the plant as it is now vs adding a fluid cooler.  I know in order to add the fluid cooler, I have to add another chiller to the loop and make it a water economizer (is that correct?)</div>
<div> </div><div>Does anyone know how I can get those four machines connected to the loop?  Is there a better way to do this?  I have used eQuest to do some energy modeling and LEED stuff but I am no good at this detailed edit mode stuff.  I am always afraid I am missing something.</div>
<div> </div><div>Thanks,</div><div>Tab<br>-- <br></div><div><font face="comic sans ms,sans-serif"><strong>Tabitha Jason</strong></font> </div>
<div><strong><font size="4"><font color="#ff0000" face="arial black,sans-serif">Therma</font><font face="verdana,sans-serif">Draft</font></font></strong> Consulting</div>
<div>Phone: (603) 365-8834</div>
<div>Fax: (603) 584-9199</div>
<div>Email: <a href="mailto:ThermaDraft@gmail.com" target="_blank">ThermaDraft@gmail.com</a></div>
<div> </div><br>