[Equest-users] Multiple Heating Hot Water Loops

[Eric Hethcoat]

How do you model multiple temperatures for various heating HW loops such
as radiant slab (120/constant temp) vs. HW loop (160/based on OA reset)
for any type system if they are all coming from the same boiler plant?
 
Do you provide a heat exchanger on the peripheral loop to account for
the different temperature?
 
Eric Hethcoat, P.E.
Partner
Latimer, Sommers & Associates, P.A.
3639 SW Summerfield Dr., Suite A
Topeka, KS  66614
c.  913.481.3256
w.  785.233.3232
f.  785.233.0647
ehethcoat at lsapa.com
 
This message and any attachments included here-in, are solely for the
intended recipient and may contain confidential or privileged
information.  If you are not the intended recipient, any review,
disclosure, copying, use, forwarding, or distribution of the information
included in this message and any attachments is prohibited.  If you have
received this communication in error, please notify the sender by reply
e-mail and immediately and permanently delete this message and any
attachments.  Thank you.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110915/89ace032/attachment.htm>