[Equest-users] Wizard BDL Error When Defining Custom Zones

Paul Diglio paul.diglio at sbcglobal.net
Tue Sep 13 08:25:31 PDT 2011


Patrick:

Yes I am closing out before finishing the zoning but I have done so successfully 
on other models and the basement level of this model.

I even tried defining several large zones in this model on the floor that is 
causing me problems and I still get the errors.  I do not get errors if I choose 
one zone per floor.

Thanks for your response,

Paul Diglio




________________________________
From: "Patrick J. O'Leary, Jr." <poleary1969 at gmail.com>
To: equest-users at lists.onebuilding.org
Sent: Tue, September 13, 2011 10:37:23 AM
Subject: Re: [Equest-users] Wizard BDL Error When Defining Custom Zones

 looks like you're closing out of equest/wizard without finishing your zoning?  
so equest does a check on the entire model & finds zones without hvac 
assignments & returns the error.

On 9/13/11 5:39 AM, Paul Diglio wrote: 
Dear eQuesters:
>
>I am having a problem defining custom zones in the DD Wizard.
>
>I can add one zone no problem.  Please see attached maplewood zone 1.jpg
>
>When I try to add the second zone (maplewood zone 2.jpg)  I get the three zone 
>error messages.jpg attached.
>
>I typically add zones in this manner and have not had a problem before.  Any 
>ideas?
>
>Thank you,
>
>Paul Diglio
>
> _______________________________________________ Equest-users mailing list 
>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org To 
>unsubscribe from this mailing list send  a blank message to 
>EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG 
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110913/35e1e2c7/attachment.htm>


More information about the Equest-users mailing list