[Equest-users] Wizard BDL Error When Defining Custom Zones

[Patrick J. O'Leary, Jr.]

looks like you're closing out of equest/wizard without finishing your 
zoning?  so equest does a check on the entire model & finds zones 
without hvac assignments & returns the error.

On 9/13/11 5:39 AM, Paul Diglio wrote:
> Dear eQuesters:
>
> I am having a problem defining custom zones in the DD Wizard.
>
> I can add one zone no problem.  Please see attached maplewood zone 1.jpg
>
> When I try to add the second zone (maplewood zone 2.jpg)  I get the 
> three zone error messages.jpg attached.
>
> I typically add zones in this manner and have not had a problem 
> before.  Any ideas?
>
> Thank you,
>
> Paul Diglio
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>    

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110913/5164cb05/attachment.htm>