[Equest-users] Fwd: WSHP - Boiler not getting on

[John Aulbach]

All:

Just looking at the pictorial diagram, the boiler isn't even connected to the 
water source heat pump loop. So how can it come on ??

John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________

PartnerEnergy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com
 
 


 



________________________________
From: Pasha Korber-Gonzalez <pasha.pkconsulting at gmail.com>
To: eQUEST Users List <equest-users at lists.onebuilding.org>; "Syed, Fareed" 
<Fareed.Syed at halcrowyolles.com>
Sent: Mon, February 14, 2011 10:44:31 AM
Subject: [Equest-users] Fwd: WSHP - Boiler not getting on


Here are Fareed's files.  If anyone has a chance to look at them.
Here is his issue:  ..there is no boiler capacities. I am not sure if boiler is 
running at all. I want the boiler to supply HW to WSHPs when the OA temp hits 
45F.
 
Thanks,
Fareed


---------- Forwarded message ----------
From: Syed, Fareed <Fareed.Syed at halcrowyolles.com>
Date: Mon, Feb 14, 2011 at 10:27 AM
Subject: RE: [Equest-users] WSHP - Boiler not getting on
To: Pasha Korber-Gonzalez <pasha.pkconsulting at gmail.com>



Hello Pasha,
 
I would really appreciate feed back on my model from the group. I was looking at 
the summary report and there is no
 
Regards,
 
Fareed
 

________________________________

From:Pasha Korber-Gonzalez [mailto:pasha.pkconsulting at gmail.com] 
Sent: Monday, February 14, 2011 11:08 AM
To: Syed, Fareed
Subject: Re: [Equest-users] WSHP - Boiler not getting on
 
Hi Fareed,
 
you're best bet for help is to attached your .pd2 and your .inp file for us to 
look at and see if we can help you troubleshoot your model file.
 
Cheers,
Pasha
On Mon, Feb 14, 2011 at 9:15 AM, Syed, Fareed <Fareed.Syed at halcrowyolles.com> 
wrote:
Hello All,
 
I am working on my first e-Quest model after working 3 years on Trace 700. 
 
I am modeling Water source heat pump with cooling tower. The boilers are not 
turning on and I do not see any gas consumption.
 
Can anyone please advice on how to make it work?
 
Thanks in advance.
 
 
 
Fareed Syed EIT LEED® AP
Analytics Specialist
 
Halcrow Yolles
One South Dearborn
 
tel:       +1 312 212 4430
fax:      +1 312 212 4206
www.halcrowyolles.com
 
Sustaining and improving the quality of people's lives
 
21st Floor
Chicago, IL 60603
 
 
 
Visit our website at http://www.halcrow.com/
------------------------------------------------------------------------
The contents of this email are confidential, for the sole use
of the intended recipient at the email address to which it has
been addressed and do not give rise to any binding legal
obligation upon Halcrow companies unless subsequently confirmed
on headed business notepaper sent by fax, letter or as an email
attachment.  Whilst reasonable care has been taken to avoid virus
transmission, no responsibility for viruses is taken and it is
your responsibility to carry out such checks as you feel
appropriate.  Emails supplied are as found and there's no
guarantee that the messages contained within the body of the
email have not been edited after receipt. If you receive this
email in error, please contact the sender immediately and delete
the message from your system.
Thank you.
-------------------------------------------------------------------------

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to 
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG


Click here to report this email as spam.



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110214/e2e2f0e4/attachment.htm>