[Equest-users] Fwd: WSHP - Boiler not getting on

Mon Feb 14 10:53:18 PST 2011

I have had the same issue on one of my model. However when I ran the hourly reports to look at the temperature of the loop it was always above 75° therefore the boilers was never needed. 

Christie Rimes, LEED BD+C

Designer

WSP ▪ FLACK + KURTZ

405 Howard Street, Suite 500

San Francisco, CA 94105

Direct: 415.402.2727 | Main: 415.398.3833

www.wspfk.com <http://www.wspfk.com/> 

Ensuring that today’s built environment preserves the natural environment in which we all live.

We are WSP. United by our difference.

WSP is one of the world’s fastest-growing design, engineering and management consultancies. Specializing in property, transport and environmental projects, we work with clients to create built and natural environments for the future.

CONFIDENTIAL
This e-mail is confidential to the named recipient. If you have received a copy in error, please destroy it. You may not use or disclose the contents of this e-mail to anyone, nor take copies of it. The only copies permitted are (1) by the named recipient and (2) for the purposes of completing successful electronic transmission to the named recipient and then only on the condition that these copies, with this notice attached, are kept confidential until destruction

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Pasha Korber-Gonzalez
Sent: Monday, February 14, 2011 10:45 AM
To: eQUEST Users List; Syed, Fareed
Subject: [Equest-users] Fwd: WSHP - Boiler not getting on

Here are Fareed's files.  If anyone has a chance to look at them.

Here is his issue:  ..there is no boiler capacities. I am not sure if boiler is running at all. I want the boiler to supply HW to WSHPs when the OA temp hits 45F.

Thanks,

Fareed

---------- Forwarded message ----------
From: Syed, Fareed <Fareed.Syed at halcrowyolles.com>
Date: Mon, Feb 14, 2011 at 10:27 AM
Subject: RE: [Equest-users] WSHP - Boiler not getting on
To: Pasha Korber-Gonzalez <pasha.pkconsulting at gmail.com>

Hello Pasha,

I would really appreciate feed back on my model from the group. I was looking at the summary report and there is no

Regards,

Fareed

________________________________

From: Pasha Korber-Gonzalez [mailto:pasha.pkconsulting at gmail.com] 
Sent: Monday, February 14, 2011 11:08 AM
To: Syed, Fareed
Subject: Re: [Equest-users] WSHP - Boiler not getting on

Hi Fareed,

you're best bet for help is to attached your .pd2 and your .inp file for us to look at and see if we can help you troubleshoot your model file.

Cheers,

Pasha

On Mon, Feb 14, 2011 at 9:15 AM, Syed, Fareed <Fareed.Syed at halcrowyolles.com> wrote:

Hello All,

I am working on my first e-Quest model after working 3 years on Trace 700. 

I am modeling Water source heat pump with cooling tower. The boilers are not turning on and I do not see any gas consumption.

Can anyone please advice on how to make it work?

Thanks in advance.

Fareed Syed EIT LEED® AP

Analytics Specialist

Halcrow Yolles

One South Dearborn

21st Floor

Chicago, IL 60603

tel:       +1 312 212 4430

fax:      +1 312 212 4206

www.halcrowyolles.com <http://www.halcrowyolles.com/> 

Sustaining and improving the quality of people's lives

Visit our website at http://www.halcrow.com <http://www.halcrow.com/> 

------------------------------------------------------------------------
The contents of this email are confidential, for the sole use
of the intended recipient at the email address to which it has
been addressed and do not give rise to any binding legal
obligation upon Halcrow companies unless subsequently confirmed
on headed business notepaper sent by fax, letter or as an email
attachment.  Whilst reasonable care has been taken to avoid virus
transmission, no responsibility for viruses is taken and it is
your responsibility to carry out such checks as you feel
appropriate.  Emails supplied are as found and there's no
guarantee that the messages contained within the body of the
email have not been edited after receipt. If you receive this
email in error, please contact the sender immediately and delete
the message from your system.
Thank you.
-------------------------------------------------------------------------

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

Click here <https://www.mailcontrol.com/sr/i0m8LqrJcqfTndxI!oX7Um3TMWn3KSUYRDiZ9SA6FRG0GLPyyhuLaCXZEmwgrHHKvn94jf8Wlt+z5oFEicUPXg==>  to report this email as spam.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110214/7ff4c664/attachment.htm>