[Equest-users] Building footprint

[Carol Gardner]

If the 2 shells are located properly the wall between them will be an
interior wall.

Carol

On Fri, Oct 22, 2010 at 1:32 PM, Jeremy McClanathan <
jmcclanathan at cdiengineers.com> wrote:

>
>
> If this is one building, then the footprint would be 72’x100’.  You would
> use custom zoning to split the building down the center.  If necessary, you
> can change the interior wall construction of the appropriate walls once you
> enter the detailed edit mode.
>
>
>
> Or, you could create two separate shells that are 36’x100’ sitting next to
> each other.  The walls between them would be exterior walls, and if I
> understand correctly, this is probably not what you want.
>
>
>
> Jeremy
>
>
>
> *From:* mike steadman [mailto:steadys at charter.net]
> *Sent:* Friday, October 22, 2010 12:49 PM
> *To:* equest-users at lists.onebuilding.org
> *Subject:* [Equest-users] Building footprint
>
>
>
> I am entering a project under schematic wizard page 3 0f 41.
>
> Basic rectangle shape building 72 feet wideby 100 ft long.
>
> I wish to divide building into 2 equal parts.
>
> 36 x 100 one side fire barn, one side municple office space.
>
> When using custom tab for building foot print , how can I draw x any y wall
> down the middle and for zoning pattern what should i select
>
>
>
> P.S. Any equest training on the horizon in the midwest?
>
>
>
> Thanks in advance
>
>
>
> Thanks
>
>
>
> Mike
>
> Mike Steadman
>
> Energy Manager
>
> ABI Mechanical
>
> 231-943-4114 ext 250
>
> msteadman at abimechanical.com
>
> Traverse City Michigan
>
> This email message, including any attachments, is for the sole use of the
> intended recipient and may contain confidential, proprietary, and/or
> privileged information, as well as content subject to copyright and other
> intellectual laws.  If you are not the intended recipient, you may not
> disclose, use, copy, or distribute the email message or its attachments.  If
> you believe you have received this email message in error, please contact
> the sender by reply email, immediately delete this email and destroy copies.
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101022/67984c92/attachment.htm>