[Equest-users] Building footprint

[Carol Gardner]

Mike,

I would model the building using 2 shells, one for the fire barn, the other
for the offices. You can use the 'custom" footprint for your spaces/zones.

Carol

On Fri, Oct 22, 2010 at 12:48 PM, mike steadman <steadys at charter.net> wrote:

>  I am entering a project under schematic wizard page 3 0f 41.
> Basic rectangle shape building 72 feet wideby 100 ft long.
> I wish to divide building into 2 equal parts.
> 36 x 100 one side fire barn, one side municple office space.
> When using custom tab for building foot print , how can I draw x any y wall
> down the middle and for zoning pattern what should i select
>
> P.S. Any equest training on the horizon in the midwest?
>
> Thanks in advance
>
> Thanks
>
> Mike
> Mike Steadman
> Energy Manager
> ABI Mechanical
> 231-943-4114 ext 250
> msteadman at abimechanical.com
> Traverse City Michigan
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101022/60cfc89e/attachment.htm>