[Equest-users] SI in eQUEST

[Pasha Korber-Gonzalez]

Hi Mikhail,

it is not possible at this time to use SI units in eQuest.  Canada is
commissioning an SI version of eQuest, a.k.a. CANQuest that should be coming
out next year sometime.  This version of the program will be based on SI
units for it's inputs.

Until then you will have to practice your conversions from SI to IP and vice
versa.

Pasha

2010/10/21 Самолётов Михаил <samoletov.mikhail at bt-comfort.ru>

>  Is there any possibility to change units type in eQUEST to SI?
>
>
>
>
>
> Sincerely yours,
>
> Mikhail Samoletov
>
> Chief engineer of
>
> *"Numerical Simulation Department"*
>
> *TECHNIQUE BUREAU*
>
> Cvetochnaya str, 25"Zh", 196084 St.Petersburg, Russia
>
> www.bt-comfort.ru
>
> phone/fax +7 (812) 318-50-30
>
> mob. +7 (931) 244-83-77
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101021/e56d55c5/attachment.htm>