[Equest-users] District heating

[TOPP - Per Topp]

Hi

Do anyone know if district still has to be calculated according to the attached pdf-file?

This means that it is necessary  to do a step1 and step 2 model for both the baseline design model and the proposed design model.

Or can district heating be calculated as purchased heat as suggested in G.3.1.1.1 and how is this then done without modeling a boiler in the baseline model?

Med venlig hilsen

Per Topp
Senior Projektingeniør
Installation, El & VVS (Ballerup)

Tlf. dir: +45 44 85 87 09
Mobil:  +45 61 55 60 15
TOPP at orbicon.dk

Orbicon | Leif Hansen A/S
Lautrupvang 4B, 2750 Ballerup
Tlf. +45 44 85 86 87 Fax +45 44 85 86 78

Tilmeld dig vores nyhedsbreve<http://www.orbicon.dk/.1239.aspx?utm_source=nyhedsbrev&utm_medium=mail>

P Tænk på miljøet før du printer

Da e-mails kan ændres elektronisk, tager Orbicon | Leif Hansen A/S forbehold for indholdet. Denne e-mail kan indeholde personlig og fortrolig information. Modtager du e-mailen ved en fejl, må den ikke distribueres, kopieres eller arkiveres. Vi beder dig slette mailen og informere afsender hurtigst muligt.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101021/f206b4d7/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DistrictEnergy-LEED.PDF
Type: application/pdf
Size: 146358 bytes
Desc: DistrictEnergy-LEED.PDF
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101021/f206b4d7/attachment.pdf>