[Equest-users] Copying Building Geometry

[Pasha Korber-Gonzalez]

Actually, I think the easiest way is to "SAVE AS" your file with a new name
while you are still in wizard mode (or this works with ddedit mode too) and
then you will have free reign to change the other building inputs and leave
the building geometry the same.

pkg

On Wed, Oct 20, 2010 at 7:10 AM, Umesh Atre <umesh at innovativedesign.net>wrote:

>
> The easiest way to do this would be to open your *.inp file, and copy
> everything up to the systems.
>
>
>
>
> -----Original Message-----
> From: equest-users-bounces at lists.onebuilding.org
> [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Erik
> Weiss
> Sent: Wednesday, October 20, 2010 3:26 AM
> To: equest-users at lists.onebuilding.org
> Subject: [Equest-users] Copying Building Geometry
>
>  I am have created a building and i need to run 3 separate models of the
> same building. i would like to be able to copy the building geometry (as
> well as any zones created) into a new project. Is there anyway to do
> this
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101020/e422afc8/attachment.htm>