[Equest-users] Copying Building Geometry

[Umesh Atre]

The easiest way to do this would be to open your *.inp file, and copy
everything up to the systems.




-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Erik
Weiss
Sent: Wednesday, October 20, 2010 3:26 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Copying Building Geometry

I am have created a building and i need to run 3 separate models of the
same building. i would like to be able to copy the building geometry (as
well as any zones created) into a new project. Is there anyway to do
this 




_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG