[Equest-users] modeling a district cooling plant

[aida darghouth asli]

Dear equest users,
It is ok I find the solution.
Best regards
DAKA

2010/11/12 aida darghouth asli <darghouthasli.aida at gmail.com>

> Dear all,
> I'm trying to model a building which has a district cooling plant, i find
> in the rachive the message below
> I want to ask how can i add the chilled water meter and where i can find
> it.
> Thank you for any assistance.
> DAKA
>
>
>
> *Vikram Sami* VSami at lasarchitect.com <equest-users%40lists.onebuilding.org?Subject=Re%3A%20%5BEquest-users%5D%20District%20Cooling%20in%20eQUEST&In-Reply-To=%3C55BA83825A482144A8637F9CAA981F760D78470C%40las-mail.lordaecksargent.internal%3E>
> *Tue Jul 8 21:32:15 PDT 2008*
>
>    - Previous message: [Equest-users] District Cooling in eQUEST<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/000137.html>
>    - Next message: [Equest-users] SS-R Report - Part Load Hours<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/000138.html>
>    - *Messages sorted by:* [ date ]<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/date.html#142>
>     [ thread ]<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/thread.html#142>
>     [ subject ]<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/subject.html#142>
>     [ author ]<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2008-July/author.html#142>
>
> ------------------------------
>
> Actually - if you set up a chilled water utility rate structure and aply it to the meter, it shows up in the summary graphs (your right - it doesn't show up in the reports though).
>
>
>
>
> Vikram Sami, LEED AP
> Direct Phone 404-253-1466 | Direct Fax 404-253-1366
>
> LORD, AECK & SARGENT ARCHITECTURE
> Responsive Design · Technological Expertise · Exceptional Service
> www.lordaecksargent.com
>
> ________________________________
>
> From: equest-users-bounces at lists.onebuilding.org <http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org> on behalf of Brian Fountain
>
> Sent: Tue 7/8/2008 09:51
> To: Colleen Nelson; equest-users at lists.onebuilding.org <http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
> Subject: Re: [Equest-users] District Cooling in eQUEST
>
>
>
> In wizard mode, you can only select chillers for your cooling plant.
> However, once you "make the jump" to detailed mode, you can add a
> chilled water meter and delete the chiller and associated cooling tower,
>
> condenser pump and condenser loop.  The chilled water meter acts like
> the district cooling system supply.
>
> Note that you will have to look to the detailed reports (the .sim
> outputs) for many of your results as some of the eQUEST summary reports
>
> do not included the chilled water meter values (as they are limited to 2
> energy types).
>
>
>
> Colleen Nelson wrote:
> >* Dear eQUEST users,
> *>*
> *>* I am looking for some 'how-to's' on modeling a district cooling plant
> *>* in eQUEST.
> *>*
> *>* I have selected Chilled Water Coils as the Cooling Source in HVAC
> *>* System Definitions screen of Schematic Design Wizard.  I don't see
> *>* District Cooling as a Chiller Type choice in Cooling Primary Equipment.
> *>*
> *>* Does anyone have experience with modeling this type of plant?
> *>*
> *>* Thanks in advance for any assistance.
> *>*
> *>* cnelson at michaudcooley.com <http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
> *>*
> *>*
> *>*
> *>* ------------------------------------------------------------------------
> *>*
> *>* _______________________________________________
> *>* Equest-users mailing list
> *>* http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> *>* To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG <http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
> *>*
> *>* ------------------------------------------------------------------------
> *>*
> *>* No virus found in this incoming message.
> *>* Checked by AVG.
> *>* Version: 7.5.524 / Virus Database: 270.4.5/1537 - Release Date: 7/6/2008 5:26 AM
> *>*
> *
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG <http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101112/cc81341a/attachment.htm>