[Equest-users] District Cooling in eQUEST

[Brian Fountain]

In wizard mode, you can only select chillers for your cooling plant.  
However, once you "make the jump" to detailed mode, you can add a 
chilled water meter and delete the chiller and associated cooling tower, 
condenser pump and condenser loop.  The chilled water meter acts like 
the district cooling system supply. 

Note that you will have to look to the detailed reports (the .sim 
outputs) for many of your results as some of the eQUEST summary reports 
do not included the chilled water meter values (as they are limited to 2 
energy types).



Colleen Nelson wrote:
> Dear eQUEST users,
>
> I am looking for some 'how-to's' on modeling a district cooling plant 
> in eQUEST.
>
> I have selected Chilled Water Coils as the Cooling Source in HVAC 
> System Definitions screen of Schematic Design Wizard.  I don't see 
> District Cooling as a Chiller Type choice in Cooling Primary Equipment.
>
> Does anyone have experience with modeling this type of plant?
>
> Thanks in advance for any assistance.
>
> cnelson at michaudcooley.com
>
>  
>  
> ------------------------------------------------------------------------
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>   
> ------------------------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG. 
> Version: 7.5.524 / Virus Database: 270.4.5/1537 - Release Date: 7/6/2008 5:26 AM
>