[Equest-users] DHW instantaneous

[Joe Snider]

Hello,

 

I am trying to model an on-demand gas hot water with an efficiency factor of
.93 from the manufacturer (Rinnai). ASHRAE says to model the baseline
according to Table 7.8 which shows an Energy Factor of .62.  My .93 unit
should be showing significant improvement in the model in the domestic hot
water, but my baseline case (with the .62) is showing slightly LESS energy
usage than my design case with a .93??

 

My process was to select the gas instantaneous in the wizard for my design
case.  Create LEED baseline file.  Then adjust the Energy Factor in the LEED
baseline file.

 

Any thoughts would be greatly appreciated.

 

Thank you,

 

Joe Snider

 

---

Joe Snider, AIA, LEED AP

 

SEQUIL Systems, Inc.

high performance sustainable structures

 

1 SE 4th Ave, Suite 205

Delray Beach, FL 33483

t: 561.921.0900

f: 561.208.6090

 

www.SEQUIL.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101109/2802b7c8/attachment.htm>