[Equest-users] Individual Process Loads

[John Aulbach]

Omer:

These individual end uses, if assigned to different zones rather than on a building level, will appear in LS-K (Space Fuels) with their assigned spaces. Then you can identify them.

Try it..

John Aulbach
Partner Energy




________________________________
From: "omoltay at mimtarch.com" <omoltay at mimtarch.com>
To: equest-users at lists.onebuilding.org
Sent: Sat, May 1, 2010 8:02:47 AM
Subject: [Equest-users] Individual Process Loads

Hi all,

Just realized that I may have done a mistake now. All of my process loads
(computers, kitchen equipment, elevators, etc) are entered into the model
in the "Equipment" tab of internal loads. For the LEED form, I need to
separate these process end uses. I see no way of assigning each internal
load to a submeter. Do I now have to start over and model these process
loads as direct loads on separate sub-meters?

Thanks for any replies,

Omer Moltay, LEED AP
Mimta

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100501/b8689fc6/attachment.htm>