[Equest-users] Heat Pump Efficiencies

Bassam Yammine byammine at flowgroup.ca
Wed Mar 24 07:50:35 PDT 2010


Hi Michael, to modify the EIR (which is in Btu/Btu) in the detailed
mode, click on the Air-Side HVAC icon at the top of your screen, then
double click on the heat pump. Under the cooling and heating tabs you
will find a Unitary Power tab where you can change your EIR.

 

Regards,

Bassam

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of M.
Shields
Sent: Wednesday, March 24, 2010 6:59 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Heat Pump Efficiencies

 

Hi All,

 

I am still fairly new to equest and I am having a bit of trouble with
setting up my HVAC.  I created a building model using the equest wizard
and now I have made a number of changes within the detailed DOE2
interface.  The building uses air source heat pumps for the HVAC and I
would like to change the EER/COP values without going back to the
wizard, but I cannot figure where these values are stored.  Is there an
easy way to make changes like that within DOE2?

 

Thanks,

Michael Shields

 

____________________________
Michael Shields
Facility Strategies Group
2222 Gold Hill Road, Suite 5
Fort Mill, SC 29708
Phone: 803-493-4507
Fax: 803-548-2511
Email: mshields at fstrategies.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100324/2a2f0899/attachment.htm>


More information about the Equest-users mailing list