[Equest-users] Desiccant Regen with HW Loop

[Steve Mignogna]

All-

Quick question here. My building has electric heating so there is no hot
water loop currently in the design. As an energy efficiency measure we are
testing a desiccant cooling system that would be regenerated with either
solar hot water or waste heat from a microturbine. However, when I connect
the turbine to the hot water loop and then connect the loop to the desiccant
system I get this error --

 ***ERROR***********************************************************************
             Loop: Regen HW Loop                    has zero design flow.
             Check input for consistency, or specify design loads.

This problem goes away if I have a heating load on the hot water loop, but
that is not the case for this project. Any thoughts or workarounds??

Thanks in advance,

-- 
Steve Mignogna
Atelier Ten
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100219/51eda85f/attachment.htm>