All-<br><br>Quick question here. My building has electric heating so there is no hot water loop currently in the design. As an energy efficiency measure we are testing a desiccant cooling system that would be regenerated with either solar hot water or waste heat from a microturbine. However, when I connect the turbine to the hot water loop and then connect the loop to the desiccant system I get this error -- <br>
<br> ***ERROR***********************************************************************<br>             Loop: Regen HW Loop                    has zero design flow.<br>             Check input for consistency, or specify design loads.<br clear="all">
<br>This problem goes away if I have a heating load on the hot water loop, but that is not the case for this project. Any thoughts or workarounds??<br><br>Thanks in advance,<br><br>-- <br>Steve Mignogna<br>Atelier Ten<br>