[Equest-users] Envelope - Clearstory
Brendan Arnold
BrendanA at MKE-Inc.com
Tue Jul 29 09:52:30 PDT 2008
I created a level above the top floor that represents the clearstories, now I am trying to incorporate that level into the floor below. Could someone give me a quick run down on how to merge or import surfaces/spaces.
Thank you.
Brendan
________________________________
From: Steven Savich [mailto:ssavich at systemswestengineers.com]
Sent: Friday, July 25, 2008 1:22 PM
To: Brendan Arnold
Subject: RE: [Equest-users] Envelope - Clearstory
Yes, that's correct. You can either import the surfaces one by one in the equest interface, or work directly in the .inp file. Depending on the number of surfaces, the latter may be easier.
Steven Savich
Systems West Engineers
411 High Street
Eugene, OR 97401-2427
(541) 342-7210
(541) 342-7220 (fax)
________________________________
From: Brendan Arnold [mailto:BrendanA at MKE-Inc.com]
Sent: Friday, July 25, 2008 12:12 PM
To: 'Steven Savich'
Subject: RE: [Equest-users] Envelope - Clearstory
Steven, Thank you for the help.
If I am going to merge the spaces later, and create the level in the DD, do I only need to worry about the geometry and glazing finishes of the clearstory? I am assuming that all the schedules and lighting profiles, etc. will be taken from the other merged space. Is this correct?
Thanks,
-Brendan
________________________________
From: Steven Savich [mailto:ssavich at systemswestengineers.com]
Sent: Friday, July 25, 2008 11:05 AM
To: Brendan Arnold
Subject: RE: [Equest-users] Envelope - Clearstory
Brendan,
It depends on the geometry you're trying to model. If the clerestory windows are vertical, you could consider creating an additional "floor" and defining a clerestory space in the DD wizard complete with roof slope, wall areas, window placement, etc then merge it into the space it will be a part of in the detailed interface.
If the geometry of the clerestory is more complex, you'll have to construct everything in the detailed interface.
Steven Savich
Systems West Engineers
411 High Street
Eugene, OR 97401-2427
(541) 342-7210
(541) 342-7220 (fax)
________________________________
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Brendan Arnold
Sent: Friday, July 25, 2008 9:39 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Envelope - Clearstory
Does anyone have good method for modeling clearstories. The clearstories are on a southern zone but facing to the north.
Can this be done in the DD wizard, or do I need to be in the Detailed Interface?
Any help is appreciated. thanks.
Brendan Arnold
MKE & Associates, Inc.
Ph: (503) 892-1188
Direct: (503) 595-5964
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080729/caa2dbe9/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Temp.pd2
Type: application/octet-stream
Size: 84704 bytes
Desc: Temp.pd2
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080729/caa2dbe9/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Temp.inp
Type: application/octet-stream
Size: 279536 bytes
Desc: Temp.inp
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080729/caa2dbe9/attachment-0001.obj>
More information about the Equest-users
mailing list