[Equest-users] Envelope - Clearstory

[Karen Walkerman]

The easiest is to change the height of the room in detailed edit mode, and
then create the north facing exterior wall with the windows in it.

Hope this helps.

--
Karen

On Fri, Jul 25, 2008 at 12:42 PM, Daniel Wilkerson <DWilkerson at dwyer.com>
wrote:

>  Brendan – perhaps you could model it with skylights on a sloped roof?  Or
> maybe  create another floor with windows in DD for your clearstory?
>
>
>
>      -Dan
>
>
>  ------------------------------
>
> *From:* equest-users-bounces at lists.onebuilding.org [mailto:
> equest-users-bounces at lists.onebuilding.org] *On Behalf Of *Brendan Arnold
> *Sent:* Friday, July 25, 2008 12:39 PM
> *To:* equest-users at lists.onebuilding.org
> *Subject:* [Equest-users] Envelope - Clearstory
>
>
>
> Does anyone have good method for modeling clearstories.  The clearstories
> are on a southern zone but facing to the north.
>
> Can this be done in the DD wizard, or do I need to be in the Detailed
> Interface?
>
>
>
> Any help is appreciated. thanks.
>
>
>
> Brendan Arnold
>
> *MKE & Associates, Inc.*
>
> Ph: (503) 892-1188
>
> Direct: (503) 595-5964
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080725/211fa681/attachment.htm>