[Equest-users] Curve Fit

[Steve Mignogna]

Patrick-

Did you check the .BDL or .INP file line 5228?  The bdl will usually
give you a better idea of where and what the error is and then you can
manually fix it in the inp file.  I can't really tell what the error
is without looking at your files, but it seems like you might have a
type (ie- the curve you defined in the boiler and the curve def have
different names).

-- 
Steve Mignogna
Atelier Ten



On Mon, Jul 28, 2008 at 4:30 PM, Patrick Darby <pdarby at twfp.com> wrote:
> Hello,
>
> I somehow created this error message and don't know how to get rid of it,
> can anyone help?
>
> Curve Fit
>     unknown/invalid component name
>         &D was referenced on line 5228 but never defined
>
> There is no error managing window, and this error appeared after I modified
> the Heat Input ratio performance curve for a Boiler.
>
> Thank you,
>
> Patrick Darby, BScE
> Mechanical Engineering Services
>
>
> The Walter Fedy Partnership
> Phone: 519-576-2150 x271
> Fax: 519-576-5499
> Web: www.twfp.com
>
> The information contained in this e-mail is intended only for the individual
> or entity to whom it is addressed. Its contents (including any attachments)
> may contain confidential and/or privileged information. If you are not an
> intended recipient you must not use, disclose, disseminate, copy or print
> its contents. If you receive this e-mail in error, please notify the sender
> by reply e-mail and permanently delete the message. Information, opinions or
> conclusions contained in this message that do not relate to the official
> business of "The Walter Fedy Partnership" will be understood as neither
> given nor endorsed by it.
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>