[Equest-users] Curve Fit

[Patrick Darby]

Hello,
 
I somehow created this error message and don't know how to get rid of
it, can anyone help?
 
Curve Fit
    unknown/invalid component name
        &D was referenced on line 5228 but never defined
 
There is no error managing window, and this error appeared after I
modified the Heat Input ratio performance curve for a Boiler.
 
Thank you,
 




Patrick Darby, BScE








Mechanical Engineering Services
 
 
The Walter Fedy Partnership 
Phone: 519-576-2150 x271
Fax: 519-576-5499
Web: www.twfp.com
 

The information contained in this e-mail is intended only for the individual or entity to whom it is addressed. Its contents (including any attachments) may contain confidential and/or privileged information. If you are not an intended recipient you must not use, disclose, disseminate, copy or print its contents. If you receive this e-mail in error, please notify the sender by reply e-mail and permanently delete the message. Information, opinions or conclusions contained in this message that do not relate to the official business of "The Walter Fedy Partnership" will be understood as neither given nor endorsed by it.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080728/25919476/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: twfp.jpg
Type: image/jpeg
Size: 8530 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080728/25919476/attachment.jpg>