[Bldg-sim] Making a building with hollow core in eQuest software

[David Eldridge]

Make the zone curl around like this:
[An Ink Drawing]




David S. Eldridge, Jr., P.E., BEMP, BEAP, HBDP, GGA
Associate

Direct: (847) 316-9224 | Mobile: (773) 490-5038

Grumman/Butkus Associates | 820 Davis Street, Suite 300 | Evanston, IL 60201
Energy Efficiency Consultants and Sustainable Design Engineers

grummanbutkus.com<http://grummanbutkus.com/> | Blog<http://grummanbutkus.com/blog> | Facebook<https://www.facebook.com/pages/GrummanButkus-Associates/1385285015032526> | Twitter<https://twitter.com/grummanbutkus>

From: Bldg-sim <bldg-sim-bounces at lists.onebuilding.org> On Behalf Of Ahmad Fraij via Bldg-sim
Sent: Wednesday, September 08, 2021 11:51 PM
To: Building Simulation Group <bldg-sim at lists.onebuilding.org>
Subject: [Bldg-sim] Making a building with hollow core in eQuest software

Hello Guys,

Can anybody please advise on how I can build a square building with a square hollow core in eQuest? The square hollow core is basically a garden opened to the sky without any roof. When I use custom footprint and start adding vertices, the vertices stay connected to make a polygon. I can't create a new polygon for the hollow core after I finish the building polygon.

Your help will be highly appreciated.

Regards

Ahmad

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20210909/6b623bc0/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 3451 bytes
Desc: image003.png
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20210909/6b623bc0/attachment-0002.png>