[Bldg-sim] adjacen zones Design Builder

[Karol Bandurski via Bldg-sim]

Dear Users of Design Builder.,

I am preparing my first model in DB. Unfortunately it is block of flats (not
just single family building). I am going to calculate energy demand of this
building (heating, artificial lighting), and then thermal comfort acc. to
Givoni guidelines for summer.

My question is how can I check if software see that one zone is adjacent to
another?
Regard zones on the same level I see the names of adjacent zones in the
brackets, next to partitions names. But how can I check it for zones
adjacent by floor or ceiling?
If the same way, it is mean that my first and second floor dosen't see to
each other - how can I change it?

Regards,
Karol
--------------------------------------------------------------------
Karol BANDURSKI M. Sc.
Faculty of Civil and Environemntal Engeneering
Division of Heating, Air Conditioning and Air Protection
Poznan University of Technology
https://www.researchgate.net/profile/Karol_Bandurski
www.put.poznan.pl/~karol.bandurski