[Bldg-sim] Compliance analysis error causing equest 3.65 to hang

Jones, Christopher via Bldg-sim bldg-sim at lists.onebuilding.org
Mon Jun 27 06:24:36 PDT 2016


Shaun,
Have you tried a different version of 3.65 to see if the error is consistent in different versions?

I found that 3.65-b7163 produced bugs during the Compliance run but 3.65-b7158 ran fine using the same project.


[cid:image003.png at 01D09C46.E75BA0D0]
Christopher Jones, P.Eng.
Senior Engineer

WSP Canada Inc.
2300 Yonge Street, Suite 2300
Toronto, ON M4P 1E4
T +1 416-644-4226
F +1 416-487-9766
C +1 416-697-0056

www.wspgroup.com<http://www.wspgroup.com/>

From: Bldg-sim [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Shaun Martin via Bldg-sim
Sent: Wednesday, June 22, 2016 8:13 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Compliance analysis error causing equest 3.65 to hang

Hi

I'm trying to run a compliance analysis but get the message:

Evaluating rulelist 'CreateBaseCentralPlant'
Rule ID 345 on [loop]

And then the program hangs.

Has anybody else seen this before?


Shaun Martin LEED-AP, BEMP
Principal
Shaun Martin Consulting
#90 - 425 Carrall Street
Vancouver, BC  V6B 6E3
p. 604-789-1095

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20160627/4a8e8f55/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 6574 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20160627/4a8e8f55/attachment-0003.png>


More information about the Bldg-sim mailing list